How To Mount Security Camera To Tree | 3 Easy Steps


This post may contain affiliate links. Also, as an Amazon Associate, we earn a small commission from qualifying purchases made on our website to minimize fees.


For beginners, Who think a lot about how to mount security camera to tree and consider it a hard process. Don’t worry!

Mounting security cameras on trees is an easy process that can be done by anyone. 

You need the mount itself to attach securely to the trunk of the tree and hold your camera in place no matter how much it moves. 

In this blog post, we’ve put together simple step-by-step instructions for easy security camera installation. 

Plus, We’ve also added different types of mountable security cameras. Besides, We compiled a list of tips to help with your way of mounting the camera to a tree.

Can you mount a security camera on a tree?

The answer is YES, you can mount a security camera on a tree to give your full protection over your property. Nowadays, camera manufacturers design a new generation of security monitoring devices such as cameras that can be used inside to monitor your yard, or outside to cover your farm.

Depending on the surveillance system you have and the types you get are they suitable for installing on a tree or not? But overall most cameras can be mounted on a tree.

Types of mountable security cameras

To mount security camera to tree you have a little information about the cam mounts.

There are many different types of mounts available depending on what type of tree bark you have. 

For example, there are chainsaw mounts for trees with thick bark or screw-in mounts for trees with softer bark. 

Depending on where you mount your camera and the outside part of the tree, you’re gonna pick your suitable mounts. 

Here are other different types to consider when buying: 

1- Wireless mountable security cameras

A wireless mountable security camera is a security camera that can be mounted on a tree or other object without running wires from the mount. They are sometimes called “WiFi cameras”.  

Wireless mountable security cameras provide many benefits. One of the most visible benefits is that you can mount them in hard-to-reach areas. 

They are also easy to mount on apartments or any place, large or narrow places which makes them suitable for trees, and other places.

These types of cameras need only a strong tree strap to fix the camera and stop it from moving due to wind.

2- Suction Cup Security Camera 

There are also mountable security cameras that can be mounted with suction cup mounting brackets. 

These security cameras often have an adhesive or fix with screws to hold them in place without relying on the mount for support. 

These mounts are typically convenient for indoor use and also outdoor. So, if the camera package that you purchase has a camera holder, you can use it outside. It’ll be suitable to mount security camera to tree. 

Note: A mountable security camera with a suction cup mount gives you a lot of flexibility to change camera location as it is easy to mount and takedown because the mount does not require tools.

We usually attach the mount to the wall or ceiling, but you can do it to trees without any screws or power tools.

3- Security cameras with stand

Another way to mount security camera to tree is to buy a security camera with a stand.

There are some mountable security cameras that have a stand to help them stand, so they don’t need to be mounted against something. 

You just need to fix the stand to the tree in a suitable position by using screws, or strong adhesive tape.

4- Security cameras with cables

In case the mountable security camera is not wireless, it is powered by wires and comes with a cable and you want to install it on the tree. 

You’ll need to install a tree socket for this type of camera by using screws and bolts, this socket will be used to power the wired cameras. T

If your mountable security camera comes without a stand or cables then there must be at least one screw hole on its body. In such cases, you can mount it by screwing bolts.

For Now, Let’s see the steps of

How To Mount Security Camera To Tree

Placing a security camera is easy to do if you have a good plan for the whole process and you prepare the suitable tools, and the camera location on the tree.

Here are the details

Step1: Find The Best Location on The Tree

The first step to mount a security camera onto a tree is locating the best possible mounting site on the trunk. 

You can use an app like TreeSnap, LeafSnap, or Barn Buddy to find the best place on the trunk to mount your camera(s). 

After finding a suitable spot on the tree, the next step is to think about the height of the camera. 

You should avoid mounting cameras too low and easy to reach spots. This could cause them problems with leafage cover (depending upon where it’s located). So, Be careful as this will make viewing less clear. 

If it’s mounted high enough such as mounting cameras on the soffit, there usually won’t be this problem. Either way, it’s important to mount high enough where there is no obstruction.

Step2: Bring your tools

In addition to the mount, you’ll need:

  1. Drill and screwdriver bit that fits your security camera mount type (usually either ¼-20 or M12).
  2. Rubber mallet for driving screws into hard surfaces like tree trunks without causing damage.
  3. Mount with a camera holder.
  4. Ladder and other typical stuff.

If your mountable security camera has no stand then you need to choose one that will have the ability to hold the mount.

Step3: Mounting Process 

In order to mount security camera to a tree, you need to mount the metal arm that supports the mount onto the tree. 

However, you don’t need to overcomplicate things! Here are some simple steps to help you mount your camera to a tree easily:

First, Clean off any debris from where you want to place it with an old toothbrush or rag. 

Second, Mount the mount firmly and at a height that will provide your desired area of coverage.

Third, In case you have A wired security camera, Mark holes on both sides using a permanent marker or screwdriver bit as an indicator then drill those two marks.

Note: double-check if you have marked it correctly. Do it by measuring the distances between the screws and their centers before drilling.

Fourth, Mount the security camera securely. Screw-in two screws through the mount holes with your drill.

Now, you’re finishing mounting the security camera to the tree process. Here are some additional tips for you

Tips and tricks for installing mount security cameras on trees

Mounting a security camera to a tree can be a complicated process. Here is an easy-to-understand list of tips that we think should make things easier for you:

  1. The mount’s surface should be leveled right and not angled in any way. 
  2. The mount should also be able to support the weight of your security camera and all its components. 
  3. Check the mount regularly, the tree trunks grow fast and can bury the mount.
  4. I recommend going for deck or stainless screws to mount the camera.
  5. Don’t hang a cable between trees. Unless you hang very big amounts of the support.
  6. Any long cable you put up will be cut. Unless you attach it to something immobile which may ruin your tree’s look.
  7. If it’s necessary you can do and raise the cable considerably higher in the tree, and make sure it’s away from people’s reach.
  1. If you already decided to hang the cable up there, make sure to keep enough length to accommodate climate changes.

The Bottom Line

We hope this mount security camera to tree guide has been helpful. Here is a quick summary of some of the previously discussed points. 

Mounting a mountable security camera to a tree can be an intimidating process. Check it regularly for wear-and-tear from weather or animal damage. 

It is better if you use stainless screws when mounting your mountable security camera on trees as they offer more corrosion resistance. 

Also, Be sure that there isn’t too much droop hanging between two trees before making additional attachments! 

However, even with these precautions in place, accidents happen. So, make sure you have enough slack cable length available for unforeseen events like heavy snowfall or animals chewing through cables.

Finally, If you have any questions or concerns about anything we’ve discussed in the article, please don’t hesitate to reach out and let us know! 

Resource: ipcamtalk.com


Marvin H. Tarrance

Marvin H. Tarrance

Marvin Is an Electric and Electronic Engineer passionate about content writing and marketing. In the past, He was installed a large number of CCTV security cameras, and IP cams also. For now, He is the Head of the Content Team which is responsible for writing informative and detailed posts for Safebudgets.Com


Leave a Comment